Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) Commissioning - ForGe Control - Manual (Page 28)

28 Rockwell Automation Publication 7000-IN012B-EN-P - June 2014
Chapter 4 Commissioning the Drive
Medium Voltage Product Support MUST complete and return the
commissioning datasheets to the Rockwell Automation Canada, Cambridge
office immediately upon completion of the drive system commissioning.
The most recent datasheets are available in the Commissioning Guidelines for
MV PowerFlex 7000 [A/B/C] Frame Drives” document, available to field service
engineers on the Intranet.
ROCKWELL AUTOMATION CANADA
135 Dundas Street
Cambridge, Ontario, N1R 5X1
Canada
MV Support Contact Info:
Office Hours: 9:00 a.m. - 5:00 p.m. EST, Monday to Friday
Phone: 1-519-740-4790, (Option 1 for Tech Support, Option 2 for MV Parts)
After Hours Support: 5:00 p.m. – 9:00 a.m. EST, 365 days
Drive Application Review To ensure trouble-free commissioning, it is necessary for all involved in the start-
up to familiarize themselves with the drive line-up and application. Do not
service the equipment without a clear understanding of the equipment’s
functional design, and the equipment’s particular application. If questions arise
that are not addressed within this manual, contact your local GMS office or
Medium Voltage Support directly.
Rockwell Automation Drive Line-up Drawings
Prior to performing any service work on the drive line-up, study and understand
the electrical and dimensional drawings provided with the equipment. These
drawings contain detailed information and instructions required for
commissioning and installation of the equipment including the following:
Dimensional Drawings
• Power cable termination locations
• Ground bus locations
• Shipping split locations
• Control and medium voltage power ratings
• Drive options
• Remote I/O protocol
• PLC options
• Motor and load specifications
• Drive power component selection ratings
• Heat exchanger ratings, connections