Rockwell Automation 6181X-12TPXPDC Industrial Integrated Computers for Hazardous Locations - Manual (Page 31)

Rockwell Automation Publication 6181X-UM001B-EN-P - May 2011 31
Chapter
4
Component Replacement
Chapter Objectives This chapter provides procedures to do the following:
• Remove and reinstall the rear cover
• Replace the CompactFlash hard disk drive
• Install a CompactFlash data card
• Install an add-in card
• Upgrade the system memory
Before performing any component replacement procedures, review
Hazardous Locations information on page 14 .
Accessories and
Replacement Parts You can view a current list of accessories at the Rockwell Automation website
http://www.ab.com/industrialcomputers ..
IMPORTANT When installing hardware or performing maintenance procedures
requiring access to internal components, we recommend that you first
back up all computer data to avoid loss.
ATTENTION: Make sure to read and understand the entire installation or
removal procedure first, before you begin configuring the computer
hardware.
Review the specifications of a new component before installing it to make
sure it is compatible with the computer. Record the model and serial
number, and any other pertinent information of new components for
future reference
ATTENTION: To prevent voiding your product warranty, use only
Rockwell Automation Allen-Bradley approved replacement parts and
accessories.