Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 63)

Setting Up a DH+ to RIO Block Transfer Pass Thru Communications System 5-9
Publication 9303-5.13 – March 1998
The main window displayed in the WHO’s Active dialog box shows the
information read from the network WHO command. The information consists of
the following:
The WHO’s Active dialog box provides the following buttons:
• SCAN
Click on the SCAN button to rescan the network to read station
information.
• KT Port x
The KT Port radio buttons let you change the currently selected DH+
network KT card from within the WHO’s Active dialog box. When you
change the KT port definition, the dialog rescans the network based on the
new setting.
This field: Specifies:
Station # The network station number for each device on the network.
Device Type The type of device that is associated with the network station number.
Station Name The textual description contained in the device at the network station number.
The Bulletin 1395 drive does not support a network station name. Therefore, the
name shown on the network map is the same for all 1395 drives.
Comm. Device The communication device type as it is identified on the network.