Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 16)

1-2 Overview
Publication 9303-5.13 – March 1998
To set up your communications system, you need to:
1. Install DriveTools32 and RSLinx. Refer to instructions later in this chapter.
2. Determine which configuration most closely matches your system, and
refer to the chapter which represents that configuration for information on
hardware and system configuration.
This communication type: Chapter
RS-232 Point-to-Point Serial for a SCANport-Compatible Drive 2
RS-232 Point-to-Point Serial for a 1395 Drive 3
DH+ Direct 4
DH+ to RIO Block Transfer Pass Thru 5
ControlNet Direct 6
Ethernet to RIO Block Transfer Pass Thru 7
RSLinx Gateway 8