Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control (PanelView 550) - Manual (Page 111)

Operator Interface 3-51
7000 “A” Frame 7000A-UM151D-EN-P – March 2013
Figure 3.72 – V Line Assigned
The changes take affect immediately, however are not saved until
you press [F10] and exit the screen. Any time prior to this you may
cancel all the changes made after coming to the screen by pressing
the [F7] key.
View Drive Status The status of the drive is viewed by pressing the [F7] key from the
Top Level Menu. This screen, shown in Figure 3.73, constantly
displays the latest status of the drive.
Figure 3.73 – Status Screen
View and Reset Alarms All drive faults and warnings are logged to their respective queues.
Collectively the faults and warnings are referred to as "Alarms".
When a new alarm occurs, the F6 key on any screen will begin to
flash in reverse video. Pressing the [F6] key on any screen will bring
you to the screen as shown in Figure 3.74.
Figure 3.74 – Alarm Summary Screen