beautypg.com

Rockwell Automation 6181X-12TPXPDC Industrial Integrated Computers for Hazardous Locations User Manual

Page 24

background image

24 Industrial Computers for Hazardous Locations

Rockwell Automation Publication 6181X-IN001C-EN-P - April 2011

Load a CF Card in the Internal CF Card Slot

Follow these steps to load a CF card in the internal CF card slot.

1.

Disconnect power from the computer.

2.

Loosen the screw that secures the CF card slot cover (1), then the screw that secures the
CF card slot lever (2).

3.

Extend the CF card slot lever (3), then pull out the CF card tray (4).

4.

Remove the CF card lock screw (5).

If necessary, remove existing CF card by sliding it out of the slot.

5.

Insert the CF card into the slot until it is firmly seated (6).

6.

Secure the CF card with the CF card lock screw, then reinstall the CF card tray into the
computer.

7.

Tighten the CF card slot cover and lever screws.

IMPORTANT

Reinstalling the CF card lock screw is required to meet hazardous
locations, mechanical shock, and vibration requirements.

6181X-12TPXPDC Display Computer

This manual is related to the following products: