Rockwell Automation 6181X-12TPXPDC Industrial Integrated Computers for Hazardous Locations - Manual (Page 21)

Industrial Computers for Hazardous Locations 21
Rockwell Automation Publication 6181X-IN001C-EN-P - April 2011
Component Replacement
Electrostatic Discharge (ESD)
Voltage Precaution
Required Tools
These tools are required for component replacement:
• #2 Phillips screwdriver
• Scissors (for DIMM replacement only)
• Antistatic wrist strap (recommended)
IMPORTANT When installing hardware or performing maintenance procedures requiring
access to internal components, we recommend that you first back up all
computer data to avoid loss.
To prevent voiding your product warranty, use only Rockwell Automation
Allen-Bradley approved replacement parts and accessories. You can view a
current list of accessories at the Rockwell Automation website
http://www.ab.com/industrialcomputers.com .
ATTENTION: Make sure to read and understand the entire installation or
removal procedure first, before you begin configuring the computer hardware.
Review the specifications of a new component before installing it to make sure it is
compatible with the computer. Record the model and serial number, and any other
pertinent information of new components for future reference.
ATTENTION: ESD can damage the computer and components. Make sure you
work in a static-safe environment and wear a grounding strap whenever
handling circuit boards, power supply, memory modules, or other internal
components.
SHOCK HAZARD: The computers contain line voltages. Disconnect all power
to the computer before you install or remove system components. Failure to do
so could result in severe electrical shock or damage to the computer.