Compactflash card – Rockwell Automation 6181X-12TPXPDC Industrial Integrated Computers for Hazardous Locations User Manual
Page 23
Industrial Computers for Hazardous Locations 23
Rockwell Automation Publication 6181X-IN001C-EN-P - April 2011
CompactFlash Card
The computers have two CompactFlash (CF) Type II card slots:
•
Internal CF slot (right side) – A card installed in this slot is considered bootable and is
designed to function as a main hard disk drive. Do not remove or load a card in this slot
while the computer is powered on.
•
External CF slot (bottom side) – This slot is functionally hot-pluggable in an
environment known to be nonhazardous. This slot is meant to be a data CF slot, but is
bootable.
Load a CF Card in the External CF Card Slot
Follow these steps to load a CF card in the external CF card slot.
1.
Loosen the screw that secures the CF card slot cover (1).
2.
Open the CF card slot cover (2).
If necessary, remove existing card by pushing the button on the hinge side.
3.
Insert the CF card into the slot until it is firmly seated (3).
4.
Close the CF card slot cover, then tighten its screw (1).
IMPORTANT
Use only catalog numbers 6189V-CFSSD8GB and 6189V-CFSSD16GB
CompactFlash (CF) cards in the 6181X industrial computers for hazardous
locations. Other replacement cards are not acceptable for use in hazardous
locations.
6181X-12TPXPDC
Display Computer