Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 52)

5–2 Installing/Removing Front Bezel Assembly Items
Publication 6182-UM001D-EN-P
At times when repairing or replacing items on the front bezel assembly,
you may need to disassemble the front bezel. You must disassemble the
front bezel when you:
• Replace the front bezel plastic overlay
• Replace the vertical legend strips
To prepare the front bezel for disassembly (all models):
1. Remove the RAC6182 from the panel or enclosure.
2. Follow the procedures on Page 4-2 to remove the computer chassis.
3. Place the front bezel assembly on a flat surface, with the overlay side
down. Take care not to scratch or damage the overlay or display
window.
To disassemble the front bezel (7.7 in. display):
1. Disconnect the keypad and touchscreen cables.
2. Remove the 10 screws securing the metal frame and lift the metal
frame away from the plastic bezel.
3. To reassemble the front bezel assembly, thread the keypad and
touchscreen cables through the hole in the metal frame.
4. Reinstall the 10 screws to attach the metal frame to the plastic
overlay assembly. Tighten the screws to a torque of 6 - 8 in–lbs (0.7 -
0.9 N•m).
5. Connect the keypad and touchscreen cables.
6. Follow the procedures on Page 4-2 to reassemble the front bezel
assembly to the computer chassis.
Disassembling the Front
Bezel