5 - installing/removing front bezel assembly items, Installing/removing front bezel assembly items, Chapter – Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System User Manual
Page 51
Installing/Removing Front Bezel
Assembly Items
This chapter describes how to replace items in the RAC6182 front bezel
assembly. The RAC6182 front bezel assembly consists of a plastic bezel
with overlay (keypad and/or touchscreen), and a metal frame assembly
that holds the LCD panel and associated interconnection circuit boards.
The LCD panel has field-replaceable backlight tubes (12.1-in. versions
only). The keypad bezel versions have removable function key legend
strips. This chapter’s topics include:
•
Replacing bezel cables
•
Disassembling the front bezel
•
Replacing the front bezel plastic overlay
•
Replacing the backlight tubes
•
Installing keypad legend strips
The RAC6182 Industrial Computer contains line voltages. Make sure
you disconnect all power to the RAC6182 Industrial Computer before
performing any of the operations described in this chapter.
ATTENTION: Disconnect all power from the RAC6182
Industrial Computer before removing components.
Failure to disconnect power could result in severe
electrical shock or damage to the RAC6182 Industrial
Computer.
Chapter
5
Chapter Objectives
Safety Precautions