Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 112)

11–2 Hardware Monitor
Publication 6182-UM001D-EN-P
You access the RAC6182 Hardware Monitor using the Hardware
Monitor interface in the Windows CE Control Panel.
To access the RAC6182 Hardware Monitor:
1. To open the Hardware Monitor interface, select Start-Settings-
C
ontrol Panel. Select or double-click on the Hardware Monitor
icon.
2. Select the Voltage and Temp tab to view the RAC6182 internal bus
voltages, internal battery voltage (battery is for the clock/calendar
and 128KB battery-backed SRAM), and the internal temperature.
The voltage and temperature readings are updated in real time. The
status icon next to each value is green if that parameter is within its
limits, and red if the parameter is outside the preset limits. If outside
of their preset ranges, then the red Diagnostics LED on the front
bezel is also lit and will remain lit until reset manually.
Using the Hardware
Monitor