Rockwell Automation 1746-XXXX SLC 500 4-Channel Analog I/O Modules User Manual - Manual (Page 91)

1 Publication 1746-UM005B-EN-P - June 2004
Appendix
A
Specifications
Analog Modules
Specification This section lists the specifications for the 1746-NI4, NIO4I, NIO4V,
NO4I and NO4V analog modules. They include:
•
General specifications
•
Current and Voltage input specifications
•
Current and Voltage output specifications
General Specifications for
NI4, NIO4I, NIO4V, NO4I,
and NO4V
Specification Value
SLC Communication Format 16 Bit Two’s Complement Binary
Field Wiring to Backplane Isolation 500V dc
Update Time 512 µs for all channels in parallel
Recommended Cable Shielded Belden #8761
Maximum Wire Size #14 AWG (maximum)
Terminal Block Removable
Location 1746 chassis
Calibration Factory Calibrated (Refer to calibration
procedure, pg. D-2)
Noise Immunity NEMA Standard ICS 2-230
Environmental Conditions
Operating Temperature
Storage Temperature
Relative Humidity
0° to +60° C (+32° to +140° F)
-40° to +85° C (-40° to +185° F)
5 to 95% (non–condensing)
Agency Certification
(when product or packaging is marked)
N223
Marked for all applicable directives
Marked for all applicable acts
C-UL Listed Industrial Control Equipment
for use in Class 1, Div 2 Hazardous
Locations