Rockwell Automation 1747-SCNR ControlNet Scanner Module Reference Manual - Manual (Page 86)

Publication 1747-RM623D-EN-P - June 2006
E-8 Application Examples
The Connection Properties window closes and the Scanlist
Configuration window should look like the following:
You have now successfully configured a rack connection to read/
write data between the SLC processor and the remote ControlNet
chassis. All that remains is to save the configuration to the network
keeper, which in this case is the 1747-SCNR scanner.
1 . Click the Save icon or click the File menu and then Save.
You are prompted to Optimize and re-write schedule for all
connections.
2. Click OK.
3. Click YES.
Your network configuration information is now written to the
network keeper.
The display on the front of your 1747-SCNR scanner should
show an image of a full glass next to the word I/O. This
indicates that all configured connections have been successfully
downloaded to the scanner. In addition, the A and OK LEDs
should be solid green and the B LED should be off, unless you
are using the redundant media option, which is not being used
in this example. The 1747-ACNR15 module should be displaying
that it is active (ACTV) and its LEDs should be solid green for A
and OK and the B LED should be off.