Insert the 1747-scnr scanner into the chassis – Rockwell Automation 1747-SCNR ControlNet Scanner Module Reference Manual User Manual

Page 16

Publication 1747-RM623D-EN-P - June 2006

1-4 Install and Connect the ControlNet Scanner

Insert the 1747-SCNR
Scanner Into the Chassis

To insert the 1747-SCNR scanner into the SLC chassis complete these
procedures.

1 . Turn off the SLC chassis power supply.

2. Select a slot for the module in the chassis, choosing any slot

except the left-most slot of the first chassis, which is reserved for
the SLC 500 processor.

ATTENTION

Do not install the 1747-SCNR scanner with the
chassis power supply on. Installing the module
with the chassis power supply on may damage
the module.

IMPORTANT

If you disconnect the ac power, you lose the chassis
ground. Electrostatic damage (ESD) protection is lost.

30801-M