Rockwell Automation 1747-SCNR ControlNet Scanner Module Reference Manual - Manual (Page 128)

Publication 1747-RM623D-EN-P - June 2006
E-50 Application Examples
At this point, the state of the two analog outputs should be
determined for the times when the SLC processor is placed into
the Program mode or in the event that communications is lost to
the 1794-ACNR15 module.
Set this state in the Advanced tab of the Connection Properties
window for this module connection, provided you do not want
the default settings of 0 decimal, which is the most common
choice. This is the same procedure we performed for discrete
outputs for the rack connection. The 1794-ACNR15 module only
supports outputs set to 0 or Hold Last State if one of the two
conditions occur.
4. Click APPLY.