Rockwell Automation 1747-SCNR ControlNet Scanner Module Reference Manual - Manual (Page 79)

1 Publication 1747-RM623D-EN-P - June 2006
Appendix E
Application Examples
What This Appendix Contains This appendix provides examples of applications and their use
with the 1747-SCNR scanner controlling discrete and analog data
on a ControlNet network via a 1747-ACNR15 and 1794-ACNR15
ControlNet adapter. Also included in this appendix is an
example of how to create peer-to-peer scheduled connections
between 1747-SCNR ControlNet scanners.
What We Assume We assume that you are familiar with setting up a network and
working with RSLogix500, RSLinx, and RSNetWorx for
ControlNet software and the 1784-KTCX15 interface card.
Example 1: Configure the
1747-SCNR Scanner with the
1746-IV16 Input Module The following example discusses how to configure the
1747-SCNR scanner with the 1746-IV16 input module.
Hardware Setup
The hardware setup for this examples includes a computer with
RSLogix500, RSLinx, RSNetWorx for ControlNet software, and a
1784-KTCX15 interface card. The chassis configuration includes
a 1747-ACNR15 module in slot 0, 1746-IA16 module in slot 1,
1746-OB16 module in slot 2, and 1746-IV16 module in slot 3.
Configure the ControlNet Network with RSNetWorx
for ControlNet Software
Follow this procedure to configure the ControlNet network
using RSNetWorx for ControlNet software.
1 . Start RSNetWorx for ControlNet software by double
clicking its icon.