Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual - Manual (Page 63)

Rockwell Automation Publication 1747-UM076C-EN-E - January 2013 57
Appendix
A
Specifications
The 1747-AENTR has the following specifications, ratings, and certifications.
Ethernet Communication
Attribute Value
EtherNet communication rate 10/100 Mbits/s, half or full-duplex
Ethernet ports 2, configured as Embedded Switch
Ethernet network topologies supported Star, Tree, Daisy chain/Linear, and Ring
Ethernet connector RJ-45, Category 5
Ethernet cable Category 5: shielded or unshielded
General Specifications
Attribute Value
Module location Always at Slot 0 (leftmost slot) on chassis
Current consumption, backplane 470 mA @ 5V DC
Thermal dissipation 2.49 W = 8.4962 Btu (IT)/hour
Isolation voltage 50V (continuous), Basic Insulation Type
Dimensions (HxWxD), approx. 145.3 x 34.8 x 130.8 mm
(5.72 x 1.37 x 5.15 in.)
Enclosure type rating None (open-style)
Wiring category
(1)
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring
and Grounding Guidelines, publication
1770-4.1 .
1 – on communication ports
Weight, approx. 168 g (0.37 lb)
North American temp code T3C
Environmental Specifications
Attribute Value
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
0…60 °C (32…140 °F)
Temperature,
nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Non-operating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Non-operating Thermal Shock):
-40…85 °C (-40…185 °F)
Temperature,
surrounding air, max 60 °C (140°F)