Rockwell Automation 1747-AENTR SLC 500 EtherNet/IP Adapter User Manual - Manual (Page 40)

34 Rockwell Automation Publication 1747-UM076C-EN-E - January 2013
34 Configure the Adapter for Direct Connection through the RSLogix 5000 or Logix Designer Application
In this example, you add a 1746-IO8 and a 1746-IA4 module with standard
configurations. Use these steps as a guide when configuring different I/O
modules for your system.
1. Right-click the name of the 1747-AENTR adapter under the
I/O Configuration folder and select New Module.
The Select Module Type dialog opens.
2. Select the 1746-IO8 module from the list and click Create.
TIP This example application uses I/O module default configurations.
For more information, refer to the SLC 500 Systems Selection
Guide, publication
1747-SG001 .