beautypg.com

Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions User Manual

Page 86

background image

6-4 Run the 1784-PCC Test Utility in Windows 2000/XP, NT 4.0, and 95/98/Me

Publication 1784-IN034D-EN-P - June 2002

If there is an error, you will see a red X and an explanation.

.

Table 6.B

If you:

Then:

do not see six green check marks or you
do not see the message stating that the
1784-PCC completed all tests
successfully

• In Windows NT 4.0, run the setup utility again and

restart your computer.

• In Windows 95/98/Me and 2000/XP, go to Device

Manager and adjust resources.

are still getting an error

• Review the chapter for your operating system.

• Follow the instructions again. If you are still having

problems, contact your Rockwell Automation
service representative for assistance.

• Refer to the Preface of this manual for information

on Rockwell Automation Support.