Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 18)

2-2 Pre-Installation Procedures
Publication 1784-IN034D-EN-P - June 2002
System Requirements
Refer to the following table for system requirements for using the 1784-PCC card.
Refer to the following table for the version of RSLinx you will need for your
operating system.
operating system Microsoft

Windows 2000/XP, NT 4.0, or 95/98/Me 1
memory for computer resources at least 8 MB
memory for card resources 4KB
IRQ 1 available IRQ
diskette drive 0ne 3.5” diskette drive
hard disk space 300K
PCMCIA slot one Type II slot
1
The listed versions of Microsoft Windows Operating Systems are the versions Rockwell Automation
offically supports.
Operating System Version of RSLinx
Windows XP/2000 with ControlNet Traffic Analyzer,
v. 1.4 2.31 or later
Windows XP 2.30.01 (build 48) or later
Windows 2000 2.20.01 or later
Windows NT 4.0 2.00.97.30 or later
Windows 95/98/Me 2.00.97.30 or later
ATTENTION
!
Windows NT users: If you have a 1784-PCC series A interface
card, you will need to perform a flash upgrade to upgrade to
series B. Refer to Publication 1784-PCC-RN1 for details. To
access this information, visit www.ab.com\support. Click on
the PC Cards link and download the PCC_Upgrade.exe file.
This file contains both the upgrade utility and the publication
(1784-PCC-RN1) containing the instructions for completing the
upgrade.