Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 48)

3-28 Install and Use the 1784-PCC Card in Windows 2000/XP
Publication 1784-IN034D-EN-P - June 2002
20. Click Driver Details. Verify the Driver file is at version 1.6.
Show the Card Unplug/Eject Icon on the Taskbar
If you frequently need to unplug the device, be sure to check the Show
Unplug/Eject icon on the taskbar checkbox on the Completing the Add/Remove
Hardware wizard screen. You can check the box the first time you install the card.
The next time you want to unplug or eject the device, you can use the icon on the
taskbar instead of the Add/Remove Hardware wizard.
If the icon is not on your taskbar, you can find the checkbox in the Add/Remove
Hardware Wizard. You must finish the process of removing the card from the slot in
order for the checkbox to take effect. You are not given the opportunity to back out
of the hardware Wizard once you get to the location of the checkbox.
1. Double-click My Computer.
2. Double-click Control Panel.
3. Double-click Add/Remove Hardware.
4. Click Next.