Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions User Manual

Page 26

3-6 Install and Use the 1784-PCC Card in Windows 2000/XP

Publication 1784-IN034D-EN-P - June 2002

At this point you need to select where the file is located.

4. Select one of the following checkboxes:

•Floppy disk drives if you are going to use the floppy that ships with

the 1784-PCC card

•CD-ROM drives if you are going to get the file from the RSLinx

CD-ROM

•Specify a location if you downloaded the driver file from

www.ab.com.

5. If you select the Specify a location radio button in Step 4, Windows

2000/XP will prompt you to provide a location for the driver, as shown
below:

Type the location of the Windows 2000/XP driver and click Ok.

Table 3.C

If you select:

Then:

Floppy disk drives

insert the PnP drivers disk into the drive and click Next.
Windows 2000/XP will search for the appropriate
driver. Continue with Step 6.

CD-ROM drives

insert the RSLinx CD into the drive and click Next.
Windows 2000/XP will search for the appropriate
driver. Continue with Step 6.

Specify a location

use this selection if you have downloaded the driver
from www.ab.com. You will be prompted for the
location path of the driver. Click Next and Continue
with Step 5.