Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 56)

4-6 Install and Use the 1784-PCC Card in Windows NT
Publication 1784-IN034D-EN-P - June 2002
2. Insert the 1784-PCC/B card.
3. Turn your machine on and log on with administrative rights.
4. If you have third-party plug-and-play PC card controller software, do the
following. otherwise, skip to Step 5 on page 4-8.
• If you have Phoenix/Softex’s Card Executive on your system, you may see
the following message:
If you get this message, do the following:
a. Choose the Do not install any driver for this card radio button.
IMPORTANT
Remember, in order for the installation process to run correctly,
you must have administrator privileges to install the software.
We strongly recommend that you exit all Windows programs
before running this utility. We cannot guarantee that data will not
be lost.
If Then
you do have third-party plug-and-play PC
card controller software go to Step 4 on page 4-6
you do not have third-party plug-and-play
PC card controller software go to Step 5 on page 4-8
X