Accessing the input and output tags, Thin profile, Generic profile – Rockwell Automation 1769-IF4XOF2 Compact 8-Bit Low Resolution Analog I/O Combination Module User Manual
Page 89
![background image](/manuals/579216/89/background.png)
Publication 1769-UM008A-EN-P - November 2001
Configuration Using the 1769-IF4XOF2 Combination Analog Module with a CompactLogix System C-9
Accessing the Input and
Output Tags
Thin Profile
The analog input data file may be accessed by clicking the plus sign
to the left of the input tag, Local:1:I. Fault and status information for
the module can be found in this input tag. Refer to Chapter 5
concerning the 32-bit Fault value (Local:1:I.Fault). 4, pages 4-3
through 4-6 describe each value in the input file for the 1769-IF4XOF2
module.
The actual analog input data for this module can be found in the
following tags under Local:1:I.
•
Local:1:I.Ch0Data Data for input Channel 0
•
Local:1:I.Ch1Data Data for input Channel 1
•
Local:1:I.Ch2Data Data for input Channel 2
•
Local:1:I.Ch3Data Data for input Channel 3
The analog output data for the two analog output channels must be
written to the following tags under Local:1:O :
•
Local:1:O.Ch0Data Data for output Channel 0
•
Local:1:O.Ch1DataData for output Channel 1
Generic Profile
Wire the module to your analog devices, or for test purposes, wire an
output on the module to an input on the module. The analog input
and output data can be found at the following tag locations:
•
Local:1:I.Data[0]
Input Channel 0 Data
•
Local:1:I.Data[1]
Input Channel 1 Data
•
Local:1:I.Data[2]
Input Channel 2 Data
•
Local:1:I.Data[3]
Input Channel 3 Data
•
Local:1:I.Data[4]
Input Channels Status Flags
•
Local:1:I.Data[5]
Output Channels Status Flags
•
Local:1:I.Data[6]
Output Data Echo [0]
•
Local:1:I.Data[7]
Output Data Echo [1]
•
Local:1:O.Data[0]
Output Channel 0 Data
•
Local:1:O.Data[1]
Output Channel 1 Data