Rockwell Automation 1203-SM1 SLC to SCANport Communication Module - Manual (Page 46)

4–18 Using Enhanced Mode
Publication 1203–5.9 –– October 1996
Figure 4.14 shows a portion of the program that enables all three
SCANport channels on the SLC to SCANport module.
Figure 4.14
Example of Enabling the SCANport channels
| Channel 1 |
| SCANport |
| Enable |
| O:1.0 |
|–––––––––––––––––––––––––––––––––––––––––––––––––––––––––( )––––––|
| | 0 | |
| |Channel 2 | |
| |SCANport | |
| |Enable | |
| | O:1.0 | |
| +–––( )––––| |
| | 8 | |
| |Channel 3 | |
| |SCANport | |
| |Enable | |
| | O:1.1 | |
| +–––( )––––+ |
| 0 |