Rockwell Automation 1203-SM1 SLC to SCANport Communication Module User Manual

Page 32

4–4

Using Enhanced Mode

Publication 1203–5.9 –– October 1996

6. Press F5 to configure the I/O using the screen shown in Figure

4.2.

Figure 4.2
An Example of the I/O Configuration Screen

7. Move the cursor to the slot containing the SLC to SCANport

module.

8. Press F5 to modify the slot using the screen shown in Figure 4.3.

Figure 4.3
Prompt to Enter the Module ID Code

9. Enter the module ID code. For enhanced mode, the module ID

code is 13616.

10.Press the Enter key.