Rockwell Automation 150 MNL/SMC DIALOG+/APP-PROD GUIDE - Manual (Page 23)

2-4 SMC-2 Smart Motor Controller
Adjustments
Figure 2.5 SMC-2 Soft Start
Table 2.A Rotary Position Initial Torque Level
Table 2.B Soft Start Time
Table 2.C Soft Stop (Available only with interface option)
Initial Torque Leve
Starting Time
Full Voltage Start
Starting Time
Starting Time
Time Select
Mode Selec
Soft Stopping Time (Active
only with interface option)
Soft Stopping Time (Active
only with interface option)
Soft Stopping Time (Active
only with interface option)
Current Limit
Energy Saver Select
(ON OFF)
/
50/60 H
(ON/OFF)
Auxiliary Contact (Up-to-Speed./Instant.)
(Active only with interface option)
ON Positio
Stall Select
(ON/OFF)
Soft Stop Select
(Active only with interface option)
Must be OFF when Soft Stop not use
Soft Stop Selec
(Active only with interface option)
Must be OFF when Soft Stop not use
NOTE: The switches shown above are for a 10 second Soft Start with a 3 0
initial torque and 25 seconds soft stop.
Position 0 1 2 3 4 5 6 7 8 9
% of Locked
Rotor Torque
0 1 2 5 10 20 30 40 50 70
Switch
Number
Time (seconds)
2 5 10 15 20 25 30
15 Off On Off On Off On Off
14 Off Off On On Off Off On
13 Off Off Off Off On On On
Switch
Number
Time (seconds)
5 10 15 25 35 45 55 110
12 Off On Off On Off On Off On
11 Off Off On On Off Off On On
10 Off Off Off Off On On On On