Rockwell Automation 150 MNL/SMC DIALOG+/APP-PROD GUIDE - Manual (Page 20)

Chapter
2
SMC-2 Smart Motor Controller
Description The SMC-2

Smart Motor controller is a compact, multi-functional
solid state controller used in starting standard three-phase squirrel
cage induction motors and controlling resistive loads.
The SMC-2 product line includes current ranges from 5–97 Amps,
200 to 600V, 50/60 Hz., UL Listed, CSA Approved, and CE labeled.
This covers applications up to 75 horsepower.
Figure 2.1 SMC-2 Controller (5–97 Amps)
Modes of Operation The following modes of operation are standard within a single
controller:
• Soft Start
• Current Limit Start
• Full Voltage Start
The built-in energy saver feature allows the controller to conserv
energy on applications where the motor is lightly loaded or unloaded
for long periods of time.