Chapter 4, Operations, Chapter objectives – Rockwell Automation 800F DeviceNet Pendant Stations User Manual
Page 31: This chapter contains the following sections, Modes of operation, Power-up/reset mode, Clears output (turns output off), Performs power-up diagnostic tests, 1 modes of operation, 1 power-up/reset mode
Chapter
4
Operations
Chapter Objectives
This chapter contains the following sections:
Modes of Operation
The 800E/F DeviceNet
™ Pendant Station has 3 operating modes:
•
Power-up/Reset Mode
•
Run Mode
•
Error Mode
Power-up/Reset Mode
During a power-up or reset, the 800E/F DeviceNet
™ Pendant Station:
1. Clears output (turns output off).
2. Performs power-up diagnostic tests.
3. If Autobaud is enabled, device synchronizes to the network.
4. Performs Duplicate MAC ID check.
If a duplicate node occurs, the output remains off and the device
goes to “Bus Off”. You must cycle power to clear the error.
Section
Page
This manual is related to the following products: