Rockwell Automation 440G-LZ Guard Locking Switch User Manual - Manual (Page 38)

38 Rockwell Automation Publication 440G-UM001A-EN-P — November 2013
Appendix B Typical Installations
Catalogue number Series 1 Description
Directive
2
EMC MD
440G-LZ21**** Guard locking RFID non-contact safety switches Yes Yes
Accessories
889D-F8AB-*
Cordset for use with sensors with Micro (M12) connector N/R N/R
889D - F8ABDM-* Patchcord for use with sensors with Micro (M12) connector N/R N/R
1) If no series number is given, then all series are covered
2) Yes = Product is certified to this directive.
N/R = This directive is not required for this product
NOMENCLATURE:
440G-LZS21 U P R H
1 2 3 4 5
1 Designates Product Type
440G-LZS21 – Guard locking RFID non-contact safety switch w/2 safety outputs and 1 auxiliary output
2 Designates Actuator Coding Type
U – Unique
S – Standard code
3 Designates Sensor Type
P – Plastic Switch
4 Designates Lock Mode
R – Power to release
L – Power to lock
5 Designates Connection Type
H – 8 pin micro (M12) connector pigtail
A – 3 meter cable
B – 10 meter cable