Rockwell Automation 440G-LZ Guard Locking Switch User Manual - Manual (Page 37)

Rockwell Automation Publication 440G-UM001A-EN-P — November 2013 37
Typical Installations Appendix B
EU Declaration of Conformity
Identification of the product: Guard Locking Safety Switch
Name and address of the manufacturer:
Rockwell Automation, Inc.
2 Executive Drive
Chelmsford, MA 01824
USA
Name and address of the authorised representative:
Rockwell Automation B.V.
Rivium Promenade 160
2909 LM Capelle aan den Ijssel
The Netherlands
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Object of the declaration: Allen Bradley / Guardmaster 440G-LZ21 Series
(reference the attached list of catalogue numbers)
The object of the declaration described above is in conformity with the relevant EU harmonisation legislation:
2004/108/EC EMC Directive (EMC)
2006/42/EC Machinery Directive (MD)
References to the relevant harmonised standards used or references to the specifications in relation to which
conformity is declared:
EN 60947-1:2007 Low-voltage switchgear and controlgear – Part 1: General rules
EN 60947-5-3:1999 + A1:2005 Low- voltage switchgear and controlgear – Part 5-3: Control circuit devices
and switching elements – Requirements for proximity devices with defined
behaviour under fault conditions (PDF)
EN 60204-1:2006 + A1:2009 Safety of Machinery – Electrical equipment of machines – General
requirements
IEC 61508: Part 1-7:2010 Functional Safety of electrical /programmable electronic safety related
systems
EN ISO 13849-1:2008 Safety related parts of control systems – Part 1: General principles of design
EN 62061:2005 Safety of Machinery – Functional safety of safety related electrical, electronic
and programmable electronic control systems
EN ISO 14119:2013 Safety of Machinery – Interlocking devices associated with guards –
Principles for design and selection
Notified Body: TUV Rheinland IndustrieService GmbH
51105 Koln Germany
performed: EU Type Examination
and issued the certificate: 968/EZ 616.00/13
Additional information:
Person authorised to compile the
technical file (MD): Authorised representative (see details above).
Product Safety Function (MD): Interlocking devices suitable for use in safety related applications up to PLe
(EN ISO 13849-1) and SIL/SIL CL (EN 61508/EN 62061)
Signed for and on behalf of the above named manufacturer:
Place and date of issue: Milwaukee, WI USA 11-Nov-2013
Name, function: Daniel L. Nachtigall, Technical Leader – Product Certification Engineering
Signature: