Rockwell Automation 160PD1 160 Profibus Communication Module - Manual (Page 31)

Using the 160-PD1 on Profibus 6–5
Double-click on the scanner in the Network window.
Double-click on PROFIBUS_DP will open the Network window.
Specify the Baud Rate 1.5 M Baud and click OK to accept the setting.
Click on the (+) sign of the Slaves folder in the Library window and
the Rockwell Automation sub-folder to display the available DP
slaves or the 160-PD1 slave
Double-click on the 160-PD1 listed in the Device Library and the
Rockwell Automation library folder. A user-defined Name and
Description can be given to this 160-PD1.
In our example, this device will be Station 3 on the network. Other
stations may be chosen by using the arrow to display a drop-down list
in the Station window.