Steriflow SSC Series - Manual (Page 7)

SSC S
erieS
O
rDering
S
chematic
— SSc S
erieS
Model
SSC Standard
How to Order
To maximize your savings on temperature validated SSC assemblies, order your SIP temperature sensor
and clean steam block valve, or check valve, with the SSC/steam trap assembly on one purchase order. We
will purchase your specified components, assemble them to the SSC and bag the assembly for shipment with
your installation drawings for shipment directly to your job site. To that end, we have made provisions in the
SSC model code for your specified components.
Note: Solid Work files (version 2008) of your chosen SSC assembly (with trap) can be emailed to your process design team so
that they can incorporated your chosen SSC configuration into your installation details.
1. Select your SSC model using the model schematic below. If separate components are required,
fill in the appropriate model order fields at the end of the model string.
2. Select the steam trap model from the steam trap ordering grid below.
3. Include quantity and model information for any temperature sensor block or check valve you
require on a separate line item on your RFQ or order.
Size
075 3/4" (DN20)
Orientation
H Horizontal Inlet
V Vertical Inlet
Gasket
0 Standard, TFE/Viton Gasket
G TFE/SST Gasket
L TFE/SST Gasket & Bolted Clamp
S Silverback Gasket
Model
—
Size
—
Orientation Sensor Body Segment Gasket Acc. #1 Acc. #2 Acc. #3
Accessory #1
0 None
S Assemble to Mark 93 Steam Trap
Sensor
N No Sensor connector needed
S Sensor connector needed
Accessory #2
0 None
T Assemble to Temperature Probe*
Accessory #3
0 None
B Assemble to Valve*
Body Segment
1 One Body Segment Assembly
L Electropolish One Body Segment Assy
2 Two Body Segment Assembly
J Electropolish Two Body Segment Assy
-7-
* See "How to Order" above, section 3