STEMCO HandBAT RF - Manual (Page 10)

5/29/2012 Page 10
The first line describes the sensor that was read, the read date and time utilizing military
time.
The second line reflects the S/N of the device.
The information read from the device follows.
The Delete record option is always allowed if the Left ( ← ) arrow key is pressed. If a
record is deleted it remains in the list so that numbers stay in order, however, the data is
removed. When a downloaded the deleted record serial number is sent but the data is
flagged as erased.
Press the Back key two times to return to the Previous Reads menu. The second item on this
page is the Erase all Records feature.
When Erase all records is selected by pressing the Enter key, the following screen will be
shown. Use the up and down arrow keys to highlight the desired selection. By selecting the Yes
menu item, and pressing the Enter key, all of the stored records will be erased. Selecting No will
return you to the previous menu.
! WARNING: Selecting the Yes option will permanently erase all records. The erased records
will not be available for retrieval.
Press the Back key to select the Download to PC option.
Highlight the Download to PC option
Press Enter. You will be given a prompt to Enter to Download as shown below.