Sensaphone CELL682 - Manual (Page 32)

30
Cell682 User’s Manual
external antenna that can be installed in a better location. Contact Sensaphone
technical support for assistance.
cell682 web page
You can view status and change settings in your Cell682 via the internet. This
makes it possible to manage your unit from anywhere in the world. See Chapter 10
for detailed information on using the web page.
HoW IT WorKs
You can perform CELL682 programming using either the CELL682 Software
or the webpage. Generally, if you are at the unit’s location it’s faster to perform
the programming using the software while directly connected to the device.
Alternatively you can program the unit remotely using the CELL 682 web page.
The PIN number of your unit is the last 4 digits of the unit’s serial number. The
default password for the web page is “cell682”. You should change this password
for security purposes.
If you performed programming using the CELL 682 software then you must
click the Programming Refresh link on the web page to have those programming
changes updated on the website. To get just the current status of the Inputs and
Outputs, you should click the Status Refresh Link. This will retrieve the latest
input status from your unit. It may take a few minutes for this process to com-
plete.