Sensaphone CELL682 User Manual
Page 30
28
Cell682 User’s Manual
Figure 1: First-Run Unit Information form
Click the New button to set-up a new Cell682 unit. The Edit Cell682 Unit screen
will appear (see right).
Figure 2: Edit Cell682 Unit
Enter the PIN, Name, Description, and Comm Port settings for this unit. The PIN
is the last four digits of the serial number. The unit Name can be up to 20 charac-
ters, the Description can be up to 30 characters. Click OK. Now click the Connect
button and the software should connect and start downloading the programming
from the unit.
Figure 3: Programming Download in progress
If this was a new unit (factory default settings) the Name you entered on the edit
screen will automatically be copied into the unit. After downloading the program-
ming, the main Cell682 window will appear (see next page).