Sensaphone WSG30 System Users manual - Manual (Page 9)

Chapter 2: Installation
9
ChAptER 2: iNStALLAtioN
phYSiCAL dESCRiptioN
The WSG30 is housed in a plastic 7.6”w x 5.1”h x 2.0”d enclosure and is suitable for wall mounting.
dEvICE layout
The front panel contains an 80 character LCD and a push button keypad. The top of the unit has an
antenna connector and the bottom contains the power and Ethernet connections. See figure below:
Figure 1: Device Layout of the WSG30
1 Antenna
2 LCD
3 Keypad
4 Ethernet Port (10/100BASE-T)
5 Power Jack
antEnna
Attach the included antenna to the antenna connector. The system communicates with the Wireless
sensors using the 2.4GHz frequency band.
lCd
The lighted LCD displays sensor information as well as diagnostic and system information.
kEypad
The keypad can be used to navigate through the system menu’s to access various sensor and system
information.