Sensaphone WSG30 System Users manual - Manual (Page 16)

WSG30 Users Manual
16
Example 4 - Twenty Four to Thirty Sensors
At least three sensors will have to be configured as routers. The routers should be located an equal
distance between the farthest sensor and the WSG30, and centrally located to minimize the distance
between sensors in the general area of the router and the WSG30. The routing sensors should be added
to the system first.
Router
Router
Router
WSG30
addIng wIRElEss sEnsoRs
To add a wireless sensor click Sensors from the main menu, then click the Add button. Enter a sensor
Name, the sensor Serial Number, choose the operating Mode (either End Point or Router), then select the
Sampling Frequency (1-5 seconds). See sample figure below:
Add Sensor screen and Serial Number sticker