Sensaphone WSG30 System Users manual - Manual (Page 20)

WSG30 Users Manual
20
parameters is provided along with the ability to send traps when alarms occur. A complete SNMPv1
MIB is provided on the WSG30 CD.
Fig 4: SNMP setup screen
Common OIDs for Sensor Values
Sensor 1 Value .1.3.6.1.4.1.8338.1.1.4.1.1.1.1.48
Sensor 2 Value .1.3.6.1.4.1.8338.1.1.4.1.1.1.2.48
Sensor 3 Value .1.3.6.1.4.1.8338.1.1.4.1.1.1.3.48
modBus®
The WSG30 can be accessed via Modbus®TCP protocol and function as a slave device. To use this
feature select the desired Modbus® Mode, Port number, and Bit Representation for your Modbus®
network.
Fig 5: Modbus setup screen