Sensaphone WSG30 System Users manual User Manual
Page 21
Chapter 5: Programming
21
nEtwoRk
The Network Settings page allows you to view and configure all parameters associated with accessing
the device via the Ethernet port (see Network Configuration in chapter 1 for details). This screen also
displays the device’s MAC address and lets you configure the web page port number. Note that if you
change the port number to anything other than 80 (default) you will be required to enter the port
number as part of the device address in your browser (e.g xxx.xxx.xxx.xxx:### where x’s represent the ip
address and #’s represent the port number).
Fig 6: Network setup screen
admIn
The Administration screen provides options to Save and Load your programming, update your WSG30
with new firmware and Reset to factory defaults. You can also choose to enable security for your
WSG30. A System Administrator password must be created before any of your User Profile logins
will become active. To create a System Administrator password check the Change Password box and
enter a password. The username for the Administrator account is “admin”. To delete the administrator
account (and disable user logins) simply delete the admin password and click Save. The Programming
Save function will create a file that includes all programming except the Network settings and the
Administration Password. Likewise when a file is loaded, the Network settings and the Administration
password will be preserved. Note that Uploading a programming file will erase the contents of the
Eventlog and Datalog.