Sensaphone WSG30 System Users manual - Manual (Page 18)

WSG30 Users Manual
18
ChAptER 5: pRogRAMMiNg
IntRoduCtIon
The WSG30 is completely programmable from the internal webpage. This makes it easy to setup,
program, and utilize the features of the device. The web page can be accessed by opening your internet
browser (Internet Explorer, Firefox, Safari, …) and entering the IP address of your WSG30 (see the
Network Configuration section in Chapter 1 for assistance). The menu items along the blue bar at the
top of screen will help you locate specific programming parameters and features. The Summary screen
is your main page to view the current status of all monitored conditions.
Fig 1: Summary Screen
sEtup mEnu
The Setup menu provides access to several programming screens dealing with the configuration of the
device. They are divided into the following areas: System, SMTP, Modbus®, Network, & Administration.
A description of each area and the associated programming parameters are described below.
Fig 2: System setup screen
systEm
The System settings are used to describe and configure general properties of the system. The informa-
tion entered into the Unit Name, Description, and Location fields will appear at the top of the webpage