Robustel M1000 Pro V2 User Guide - Manual (Page 63)

Robustel GoRugged M1000 Pro V2 User Guide
RT_UG_M1000 Pro V2_v.2.0.0
19.11.2013 62 / 69
Confidential
M1000_ProV2_PhoneGroup:
0601
phoneNumber1 cmd,value value: string, max length 20
0602 phoneNumber2 cmd,value value: string, max length 20
0603 phoneNumber3 cmd,value value: string, max length 20
0604 phoneNumber4 cmd,value value: string, max length 20
0605 phoneNumber5 cmd,value value: string, max length 20
0606 phoneNumber6 cmd,value value: string, max length 20
0607 phoneNumber7 cmd,value value: string, max length 20
0608 phoneNumber8 cmd,value value: string, max length 20
0609 phoneNumber9 cmd,value value: string, max length 20
0610 phoneNumber10 cmd,value value: string, max length 20
0633 phoneGroupMapping1 cmd,flag
flag:
Bit0 refers to Phone No.1”: 1- add to
Phone Group 1, 0 – do not add to
Phone Group 1;
Bit 1 refers to Phone No.2”: 1- add
to Phone Group 1 , 0 – do not add to
Phone Group 1;
Bit 2 refers to Phone No.3”: 1- add
to Phone Group 1, 0 – do not add to
Phone Group 1;
……
Bit 9 refers to Phone No.10”: 1- add
to Phone Group 1, 0 – do not add to
Phone Group 1;
Following commands such as
“phoneGroupMapping2” and
“phoneGroupMapping3”, etc are the
same.
0634 phoneGroupMapping2 cmd,flag
0635 phoneGroupMapping3 cmd,flag
0636 phoneGroupMapping4 cmd,flag
0637 phoneGroupMapping5 cmd,flag
0638 phoneGroupMapping6 cmd,flag
0639 phoneGroupMapping7 cmd,flag
0640 phoneGroupMapping8 cmd,flag
0641 phoneGroupMapping9 cmd,flag
0642 phoneGroupMapping10 cmd,flag
M1000_ProV2_Wakeup:
0701
timingWakeupEnable1 cmd,flag flag: 0 - disable,1 - enable
0702 wakeupHour1 cmd,value value: 0-23
0703 wakeupMinute1 cmd,value value: 0-59
0704 timingWakeupEnable2 cmd,flag flag: 0 - disable,1 - enable