Robustel M1000 Pro V2 User Guide - Manual (Page 22)

Robustel GoRugged M1000 Pro V2 User Guide
RT_UG_M1000 Pro V2_v.2.0.0
19.11.2013 21 / 69
Confidential
Note:
 If you choose TCP client mode, the configurator will establish a TCP connection to the remote gateway
which works as TCP server.
 If you choose TCP server mode, the configurator will be in listening status. Then you need to send an SMS to
the remote gateway to trigger it to establish a TCP connection with configurator. The form of SMS is “0009,
configurator’s IP address or domain name, configurator’s TCP port”. Please refer to section Chapter 1.5.2
SMS Command for Remote Control
 The NMS function of gateway must have been enabled. Please refer to section 3.2.16 NMS.
 The cell phone’s number must be included in gateway’s phonebook.
3. Click button. After that you can see the popup windows “Operation Succeed”.
3.2.3 Operation Area Introduction
Menu Icon Description
File->Exit Exit the M1000 Pro V2 Configurator.
Settings->Communication Set the communication ways of configurator: Serial or TCP.