Robustel M1000 Pro V2 User Guide - Manual (Page 45)

Robustel GoRugged M1000 Pro V2 User Guide
RT_UG_M1000 Pro V2_v.2.0.0
19.11.2013 44 / 69
Confidential
NMS
Item Description Default
Device Name
Write down the description name of the gateway, such as write down the
gateway installation site name in order to identify each gateway.
DTU
Configurator
Password Set password for the Configurator. When run M1000 Pro V2 Configurator you
need to enter this password.
Password @ SMS
Control
Set password for SMS control, including remote configuration and remote
reading gateway status.
The password can be left as null, maximum 20 ASCII characters.
null
Phone Group @ SMS
Control
Set the Phone group which is permitted to SMS control this gateway. 1
Enable TCP Server @
Remote
TCP
Management
Tick this checkbox to enable Remote TCP Management.
Normally, gateway works under TCP server mode for NMS function, but it also
can work under TCP client mode (start by SMS control). Please refer to 3.2.2
Management via TCP connection to get the detail information.
Disable
Port @ Remote TCP Set the listening port of TCP server for NMS function. 30000