2 management via tcp connection, Management via tcp connection – Robustel M1000 Pro V2 User Guide User Manual
Page 21
Robustel GoRugged M1000 Pro V2 User Guide
RT_UG_M1000 Pro V2_v.2.0.0
19.11.2013
20 / 69
Confidential
3.
Select correct COM port, then click
button. After that you can see the popup windows “Operation
Succeed”.
Note: The RS-232 connector uses standard PINOUT. A direct male DB9 to female DB9 cable can be used to
connect to a PC’s serial port.
3.2.2 Management via TCP connection
1.
Double click “M1000 Pro V2 Configurator.exe” to start the software.
4.
Go to tab “Settings” -> “Communication”.
2.
Select “TCP” interface and the correct mode in the drop down boxes, and enter the local TCP port. If you choose
client mode, you need to enter the remote gateway’s IP address. Then click “OK”.