Robustel M1000 Pro V2 User Guide - Manual (Page 19)

Robustel GoRugged M1000 Pro V2 User Guide
RT_UG_M1000 Pro V2_v.2.0.0
19.11.2013 18 / 69
Confidential
Chapter 3. Operate the Gateway
3.1 Working Mode Overview
There are two working modes available in the gateway, please check carefully:
Mode
Description
Config Mode
When DIP switches to Config Mode, user could use follow functions:
1. Configure gateway via M1000 Pro V2 Configurator ;
2. Upgrade firmware.
Serial port parameters is fixed as 115200, 8, None, 1
Normal Mode
When DIP switches to Normal Mode, user could use follow functions:
1. Automatic GPRS/UMTS connection (no AT commands required);
2. Wakeup by Timing/Periodical/Call/SMS/Serial Data;
3. Transparent data communication or become a Modbus gateway;
4. CSD communication.
5. Remote configuration or firmware updating.
Serial port default parameters: 115200, 8, None, 1
3.2 M1000 Pro V2 Configurator Overview
M1000 Pro V2 Configurator is a PC-based configuration software tool for managing and configuring Robustel M1000
Pro V2 gateway. With a full graphics mode and Windows-based environment, even first time users will find it easy to
learn how to use this new software tool.
M1000 Pro V2 Configurator not only makes configuration easily, but also makes it convenient to carry out “mass
deployment” and “pre-configuration”. The most important benefits of using the “M1000 Pro V2 Configurator” utility
are:
1. Green software, no need installation;
2. Full graphics mode, easy to learn how to configure the M1000 Pro V2;
3. Configuration profile can be easily stored, and then replicated to other M1000 Pro V2;
4. Easy to upgrade gateway firmware.
Note: M1000 Pro V2 Configurator can be used with Windows 2000/XP/Vista/7 32/64-bit operation systems. If there is
any running issue, for example, the Configurator run normally in Win 7 system but fail to run in Windows XP system,
please search “Microsoft Visual C++ 2008 Redistributable Package” to download relevant patch and then install the
patch.