Robustel M1000 Pro V2 User Guide - Manual (Page 32)

Robustel GoRugged M1000 Pro V2 User Guide
RT_UG_M1000 Pro V2_v.2.0.0
19.11.2013 31 / 69
Confidential
User could configure this field after setting gateway under Connect On Demand mode,
input from 10 to 1200 seconds.
Max Retries
@
Connection
Control
The maximum retries times for automatically re-connect when gateway fails to dial up,
input from 1 to 60.
After maximum retries, If the gateway still cannot dial up successfully, it will reboot the
wireless module and try to re-connect again. If another SIM card is detected, the gateway
will try to switch to the other SIM card and then re-connect with maximum retries. If
there is one SIM card the gateway will use the same SIM card to re-connect with
maximum retries.
When connecting successful, the Max Retries counter will be set to 0.
5
Connection
Interval
Gateway will automatically re-connect with this interval when it fails communicating to
peer via TCP or UDP; also gateway will automatically re-dial with this interval if PPP dial
up failed. Input from 10 to 1200 seconds.
60
Enable
Online
Notification
Click to enable Online SMS Notification function, which will send SMS to the phone
numbers included in the Phone Group tab.
Online SMS Notification includes follow information:
Name:
Reg:
RSSI:
Operator:
Local IP:
Time:
Note: Local IP is the gateway’s IP address assigned by ISP when dial-up to cellular network
successful.
Disable
Phone
Group
Select the phone group which the online notification SMS sent to. 1
Shut Down
Module
When Idle
Enable to set the gateway to shut down module when connectivity is in idle state. This
function can only be configured under Connect On Demand mode.
Disable
Enable @
CSD
Click to enable CSD feature. Disable
Caller Phone
Group
@
CSD
Gateway will only receive CSD call from specific phone numbers which are authorized in
this Phone Group.
1