Robustel M1000 Pro V2 User Guide - Manual (Page 60)

Robustel GoRugged M1000 Pro V2 User Guide
RT_UG_M1000 Pro V2_v.2.0.0
19.11.2013 59 / 69
Confidential
5.2.3 SMS Commands List
Cmd Description Syntax Comments
Control Commands
0000 Set Factory Defaults passwd:cmd or cmd
if no passwd,please use command
"cmd", or use command"
passwd:cmd" if there is a password.
* - means can be null
Following commands are the same.
0001 Reset Device cmd
0002 Save Parameters cmd
0003 Get Device Status cmd
0004 Save Parameters and Reset Device cmd
0005 Clear Event Count cmd
0006 Start Event Counter cmd
0007 get Event Count Value cmd
0008 switch SIM card cmd
0009 Start NMS TCP Client cmd,addr or domain,port
Set Commands (“cmd,value” or “cmd,flag” to set new configuration; “cmd” can be used to get configuration)
M1000_ProV2_ComPort:
0101
COM type set cmd,flag flag:0 - RS232 1 - RS485
0101 COM type get cmd
0102 baudrate cmd,flag
flag:
0 : 1200, 1 : 2400, 2 : 4800, 3 : 9600,
4 : 19200, 5 : 38400, 6 : 57600, 7 :
115200
0103 dataBits cmd,flag flag:0 -7, 1 - 8
0104 stopBits cmd,flag flag:0 – 1, 1 – 2
0105 parity cmd,flag
flag:0 – None, 1 – Odd, 2 – Even
3 – Mark, 4 – Space
0106 flowCtrl cmd,flag flag:0 – None, 1 – Hardware
0107 packingInterval cmd,flag flag:2 – 100, default 5
0108 packingLength cmd,flag flag:0 – 5000
0109 enableDelimiter1 cmd,flag flag:0-disable,1-enable
0110 delimiter1 cmd,value Value: 0x00 - 0xff (Hex)
0111 enableDelimiter2 cmd,flag flag:0 - disable,1 – enable
0112 delimiter2 cmd,value value: 0x00 - 0xff (Hex)
0113 delimiterProcess cmd,flag
flag:0 – Do Nothing
1 – Strip Delimiter
M1000_ProV2_Gprs:
0201 authTypeSim1 cmd,flag
flag:0 – None, 1 – Auto
2 – PAP, 3 – CHAP