Robustel M1000 Pro V2 User Guide - Manual (Page 23)

Robustel GoRugged M1000 Pro V2 User Guide
RT_UG_M1000 Pro V2_v.2.0.0
19.11.2013 22 / 69
Confidential
Settings->Export
Export the gateway’s current configuration file to your
local PC.
Settings->Import
Import the gateway’s configuration file from local PC to
the gateway.
Help->Help Show some notices about this configurator.
Help->About
Manufacturer’s information and Gateway Configuratior
version.
Port No.
Select the local RS-232 port to communicate with the
gateway.
Connect Connect the M1000 Pro V2 Configurator to the gateway.
Disconnect
Disconnect the M1000 Pro V2 Configurator to the gateway,
and release the PC’s RS-232 port.
Read Read gateway’s current settings.
Write
Save changes into gateway.
Note: Some parameters changes need to reboot to take
effect.
Default Set gateway to default factory settings.
Reboot Reboot the gateway.
Exit Exit the M1000 Pro V2 Configurator.
Disconnecting
Gateway is not communicating with M1000 Pro V2
Configurator.
Connecting
Gateway is communicating with M1000 Pro V2
Configurator.
Serial Management Settings
Show current RS232 communication parameter.
TCP Management Settings
Show current TCP management communication status