Robustel M1000 Pro V2 User Guide - Manual (Page 55)

Robustel GoRugged M1000 Pro V2 User Guide
RT_UG_M1000 Pro V2_v.2.0.0
19.11.2013 54 / 69
Confidential
Types of TCP Server Connection:
1. Fixed Public IP for the gateway.
If your cellular service provider offers a fixed public IP address after you connect to the cellular network, you can
access the gateway from a host PC using either a private IP or public IP.
2. Dynamic public IP with domain name for the gateway.
If your cellular service provider offers a dynamic public IP address after you connect to the cellular network, you
can use the DDNS function to get a domain name from the domain name server for the gateway. Then you can
access the gateway from a host PC using this domain name.
3. Connecting TCP client and TCP server within the same cellular service provider.
In order to connect properly, the IP addresses of the two gateway devices must belong to the same sub network.
To ensure that this is the case, use the same cellular ISP to connect the devices to the network. In addition, you
will need to request that the cellular ISP provide you with two private fixed IP addresses (e.g., 192.168.1.1 and
192.168.1.2).
Configuration and Operation:
1. Turn the gateway to Config mode and connect it to your PC properly.
2. Open the M1000 Pro V2 Configurator.
3. Turn to GPRS tap. Set APN, Username and Password of SIM 1. If you need to use SIM 2, you also need to set
these parameters of SIM 2. Then click “Write”.